HPE ProLiant DL385 Gen10, Maintenance And Service Manual

Page: 65 / 166

To replace the component, reverse the removal procedure.
Removing and replacing a 4LFF midplane cage
Procedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3.
Do one of the following:
•
Extend the server from the rack.
• Remove the server from the rack.
4. Remove the access panel.
5. If installed, remove all riser cages:
• Primary or secondary PCIe riser cage ( Removing and replacing the primary or secondary PCIe riser cages)
• Tertiary PCIe riser cage ( Removing and replacing the tertiary PCIe riser cage)
6. Disconnect the power and cables from the drive cage.
7. Raise the blue tabs on the drive tray and lift the drive cage to a 15 degree angle.
8.
Pull the plunger pin to disengage it.
9. Remove all drives ( Removing and replacing drives).
10. Using both hands, remove the drive cage from the server.
Removal and replacement procedures
65