HPE ProLiant DL325, Maintenance And Service Manual

Page: 75 / 144

4. Do one of the following:
• Extend the server from the rack .
• Remove the server from the rack .
5. Remove the access panel .
6. Remove the DIMM.
To replace the component, reverse the removal procedure.
Removing and replacing a heatsink
To perform this procedure, you will need the following:
• T-20 screwdriver
• Alcohol wipe
Procedure
1. Observe the following alert.
CAUTION: When handling the heatsink, always hold it along the top and bottom of the fins.
Holding it from the sides can damage the fins.
2. If installed, remove the bezel .
3. Power down the server .
4. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
5. Do one of the following:
Removal and replacement procedures 75