HPE ProLiant DL325, Maintenance And Service Manual

Page: 53 / 144

Removing and replacing an energy pack
Procedure
1. If installed, remove the bezel .
2. Power down the server .
3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4. Do one of the following:
• Extend the server from the rack .
• Remove the server from the rack .
5. Remove the access panel .
6. Disconnect the energy pack cable from the system board.
7. Remove the energy pack.
To replace the component, reverse the removal procedure.
Removing and replacing the energy pack holder
Procedure
1. If installed, remove the bezel .
2. Power down the server .
3. Remove all power:
Removal and replacement procedures 53