HPE OfficeConnect 1850 Series Management And Configuration Manual Download Page 61

Page: 61 / 97

LLDP Global Statistics

Table 31. LLDP Global Statistics Fields

Click

Clear All Counters

to reset all statistics to their initial values.

Field

Description

Global Statistics

Insertions

The number of times the complete set of information advertised by a particular MAC Service

Access Point (MSAP) has been inserted into tables associated with the remote systems.

Deletions

The number of times the complete set of information advertised by a particular MSAP has

been deleted from tables associated with the remote systems.

Drops

The number of times the complete set of information advertised by a particular MSAP could

not be entered into tables associated with the remote systems because of insufficient

resources.

Age Outs

The number of times the complete set of information advertised by a particular MSAP has

been deleted from tables associated with the remote systems because the information

timeliness interval has expired.

Time Since Last Update

Time when an entry was created, modified, or deleted in the tables associated with the remote

system.

Interface Statistics

Interface

The interface ID.

Transmitted Frames

The number of LLDP frames transmitted on the interface.

Received Frames

The number of valid LLDP frames received on the interface.

Discarded Frames

The number of LLDP frames the interface discarded for any reason.

Errors

The number of invalid LLDP frames received by the LLDP agent on the interface.

MED TLVs

The total number of LLDP-MED TLVs received on the interface.

Summary of Contents for OfficeConnect 1850 Series


































































































Search results

Summary of Contents for OfficeConnect 1850 Series

Reviews:

Related manuals for OfficeConnect 1850 Series

Brands by name

Popular brands

HPE OfficeConnect 1850 Series, Management And Configuration Manual

Search results

Summary of Contents for OfficeConnect 1850 Series

Reviews:

Related manuals for OfficeConnect 1850 Series

Brands by name

Popular brands