HPE OfficeConnect 1850 Series Management And Configuration Manual Download Page 25

Page: 25 / 97

Port Configuration

4 Switching Features

You can use the Switching pages to configure port operation and capabilities.

Port Configuration

You can use the Port Configuration pages to display port status, configure port settings, and view sta-
tistics on packets transmitted on the port.

Port Status

The Port Status page displays the operational and administrative status of each port and enables port
configuration. To view this page, click

Switching

Port Configuration

in the navigation pane.

Figure 10. Port Status Page

Table 7.

Port Status Fields

Field

Description

Interface

The port or trunk ID.

Admin Mode

The administrative mode of the interface. If a port or trunk is administratively disabled, it

cannot forward traffic.



Enabled: Administratively enabled.



Disabled: Administratively disabled.



D-Disabled: Automatically disabled by the system due to error conditions. For example,

an interface may be disabled if it exceeded its rate limit. Please see error logs for more

information.

Summary of Contents for OfficeConnect 1850 Series


































































































Search results

Summary of Contents for OfficeConnect 1850 Series

Reviews:

Related manuals for OfficeConnect 1850 Series

Brands by name

Popular brands

HPE OfficeConnect 1850 Series, Management And Configuration Manual

Search results

Summary of Contents for OfficeConnect 1850 Series

Reviews:

Related manuals for OfficeConnect 1850 Series

Brands by name

Popular brands