HPE OfficeConnect 1850 Series Management And Configuration Manual Download Page 84 | Manualshive

Page: 84 / 97

background image

Page 84

Reboot Switch

Reboot Switch

Use this feature to perform a software reboot of the switch. If you applied configuration changes, click
the

Save Configuration

button in the upper right of any page before rebooting. If the switch is config-

ured to use DHCP to acquire its IP address, the address may change upon restart; you will need to
determine the address before logging back in to the management utility.
To display the Reboot Switch page, click

Diagnostics

>

Reboot Switch

.

Figure 55. Reboot Switch Page

Click

Reboot

to reboot the switch.

Factory Defaults

You can use the Reset Configuration page to restore all settings to their factory default values. All con-
figuration changes, including those that were previously saved, are reset in the running system by this
action.If the switch is configured to use DHCP to acquire its IP address, the address may change upon
restart; you will need to determine the address before logging back in to the management utility.
To display the Factory Defaults page, click

Diagnostics

>

Factory Defaults

.

Figure 56. Reset Configuration Page

Click

Reset

to restore the system to the default settings.

CAUTION:

It is recommended that you back up the current configuration file prior to restoring the
factory defaults configuration. See

“Backup and Update Manager” on page 90

for

instructions.

«
...
82
83
84
85
86
...
»

Summary of Contents for OfficeConnect 1850 Series


































































































Reviews:

No comments

Related manuals for OfficeConnect 1850 Series

Brand: FAAC Pages: 2

Brand: Movie Vision Pages: 2

Brand: SMC Networks Pages: 2

Brand: Omega Engineering Pages: 8

Brand: Attwood Pages: 2

Brand: Zamel Pages: 2

Brand: Vega Pages: 28

Brand: GBC Pages: 2

TM-1-8210 Series

Brand: Eaton Pages: 3

Safeline 2000 Light

Brand: Hisselektronik Pages: 9

Brand: Sunix Pages: 55

Brand: T.I.P. Pages: 42

Brand: Allen-Bradley Pages: 4

Brand: Leviton Pages: 2

Brand: Kramer Pages: 39

Brand: IOGear Pages: 12

Brand: Magnetrol Pages: 32

Brand: Shinybow USA Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands