manualshive.com logo in svg

HPE FlexNetwork HSR6800 series, Security Command Reference

The HPE FlexNetwork HSR6800 series offers robust security features for enterprise networks. Enhance your network's protection with the Security Command Reference manual, available for free download from our website. Access detailed instructions and configurations to ensure maximum security for your organization's network infrastructure.

Share
Download
background image

59 

Default command level 

2: System level 

Parameters 

radius-scheme

 

radius-scheme-name

: Specifies buffered stop-accounting requests that are 

destined for the accounting server defined in a RADIUS scheme. The RADIUS scheme name is a 
case-insensitive string of 1 to 32 characters. 

session-id

 

session-id

: Specifies the stop-accounting requests buffered for a session. The session 

ID is a string of 1 to 50 characters. 

time-range

 

start-time

 

stop-time

: Specifies the stop-accounting requests buffered in a time range. 

The start time and end time must be in the format HH:MM:SS-MM/DD/YYYY or 
HH:MM:SS-YYYY/MM/DD. 

user-name 

user-name

: Specifies the stop-accounting requests buffered for a user. The username is 

a case-sensitive string of 1 to 80 characters. Whether the 

user-name

 argument should include the 

domain name depends on the setting configured by the 

user-name-format

 command for the 

RADIUS scheme. 

slot

 

slot-number

: Specifies a card by its slot number. The 

slot-number

 argument represents the slot 

number of the card. (In standalone mode.) 

chassis

 

chassis-number

 slot

 

slot-number

: Specifies a card on an IRF member device. The 

chassis-number

 argument represents the member ID of the IRF member device, and the 

slot-number

 argument represents the slot number of the card. (In IRF mode.) 

|

: Filters command output by specifying a regular expression. For more information about regular 

expressions, see 

Fundamentals Configuration Guide

. 

begin

: Displays the first line that matches the specified regular expression and all lines that follow. 

exclude

: Displays all lines that do not match the specified regular expression. 

include

: Displays all lines that match the specified regular expression. 

regular-expression

: Specifies a regular expression, a case-sensitive string of 1 to 256 characters. 

Usage guidelines 

If the device sends a stop-accounting request to a RADIUS server but receives no response, it 
retransmits it up to a certain number of times (defined by the 

retry

 command). If the device still 

receives no response, it considers the stop-accounting attempt a failure, buffers the request, and 
makes another stop-accounting attempt. The maximum number of the stop-accounting attempts is 
defined by the 

retry stop-accounting

 command. If all attempts fail, the device discards the request. 

Examples 

# Display information about the stop-accounting requests buffered for user 

abc

. (In standalone 

mode.) 

<Sysname> display stop-accounting-buffer user-name abc slot 0 

 Slot  0: 

RDIdx Session-ID               user name                  Happened time 

1    1000326232325010          abc                       23:27:16-08/31/2006 

1    1000326232326010          abc                       23:33:01-08/31/2006 

Total 2 record(s) Matched 

# Dsplay information about the stop-accounting requests buffered for user 

abc

 on slot 0 of IRF 

member 1. (In IRF mode.) 

<Sysname> display stop-accounting-buffer user-name abc chassis 1 slot 0 

 Slot  0 in chassis  1: 

RDIdx Session-ID               user name                  Happened time 

1    1000326232325010          abc                       23:27:16-08/31/2006 

Summary of Contents for FlexNetwork HSR6800 series



























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for FlexNetwork HSR6800 series

D-Link DXS-3610-54S Quick Installation Manual preview
DXS-3610-54S
Brand: D-Link Pages: 38
D-Link DWL-3150 Install Manual preview
DWL-3150
Brand: D-Link Pages: 8
D-Link DSS-8+ Manual preview
DSS-8+
Brand: D-Link Pages: 22
D-Link DSS-5+ Manual preview
DSS-5+
Brand: D-Link Pages: 20
D-Link DSS-24+ Technical Specifications preview
DSS-24+
Brand: D-Link Pages: 2
D-Link DSS-24+ Manual preview
DSS-24+
Brand: D-Link Pages: 16
D-Link DI-804V Quick Install Manual preview
DI-804V
Brand: D-Link Pages: 12
D-Link DIR-615 - Wireless N Router Installation Manual preview
DIR-615 - Wireless N Router
Brand: D-Link Pages: 13
D-Link Cobra DSL-5300 User Manual preview
Cobra DSL-5300
Brand: D-Link Pages: 124
D-Link Web Smart DES-1210-28P Selection Manual preview
Web Smart DES-1210-28P
Brand: D-Link Pages: 6
D-Link 2Voice + 4SW VoIP Router DVG-1402S User Manual preview
2Voice + 4SW VoIP Router DVG-1402S
Brand: D-Link Pages: 57
D-Link xStack Storage DSN-4000 Series Manual preview
xStack Storage DSN-4000 Series
Brand: D-Link Pages: 23
D-Link Express EtherNetwork DI-604 Brochure preview
Express EtherNetwork DI-604
Brand: D-Link Pages: 7
D-Link xStack Storage DSN-4000 Series Cli User'S Manual preview
xStack Storage DSN-4000 Series
Brand: D-Link Pages: 97
D-Link SharePort DIR-825 Quick Start Manual preview
SharePort DIR-825
Brand: D-Link Pages: 2
D-Link Amplifi DIR-645 Quick Installation Manual preview
Amplifi DIR-645
Brand: D-Link Pages: 28
Paradyne 4300 Installation Instructions Manual preview
4300
Brand: Paradyne Pages: 22
Paradyne 3163 Quick Reference preview
3163
Brand: Paradyne Pages: 16

Brands by name

Popular brands

Load more brands