19
undo authorization login
Default
The default authorization method for the ISP domain is used for login users.
Views
ISP domain view
Default command level
2: System level
Parameters
hwtacacs-scheme
hwtacacs-scheme-name
: Specifies an HWTACACS scheme by its name, a
case-insensitive string of 1 to 32 characters.
local
: Performs local authorization.
none
: Does not perform any authorization exchange. After passing authentication, FTP users can
access the root directory of the device, and other login users can access only the commands of Level
0.
radius-scheme
radius-scheme-name
: Specifies a RADIUS scheme by its name, a case-insensitive
string of 1 to 32 characters.
Usage guidelines
The specified RADIUS or HWTACACS scheme must have been configured.
The RADIUS authorization configuration takes effect only when the authentication method and
authorization method of the ISP domain use the same RADIUS scheme.
Examples
# Configure ISP domain
test
to use local authorization for login users.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authorization login local
# Configure ISP domain
test
to use RADIUS authorization scheme
rd
for login users and use local
authorization as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authorization login radius-scheme rd local
Related commands
•
local-user
•
authorization
default
•
hwtacacs
scheme
•
radius
scheme
authorization portal
Use
authorization portal
to configure the authorization method for portal users.
Use
undo authorization portal
to restore the default.
Syntax
authorization portal
{
local
|
none
|
radius-scheme
radius-scheme-name
[
local
] }
undo authorization portal
