120
[Sysname-GigabitEthernet3/0/1] dot1x max-user 32
# Configure GigabitEthernet 3/0/2 through GigabitEthernet 3/0/5 each to support a maximum of 32
concurrent 802.1X users.
<Sysname> system-view
[Sysname] dot1x max-user 32 interface gigabitethernet 3/0/2 to gigabitethernet 3/0/5
Related commands
display dot1x
dot1x multicast-trigger
Use
dot1x multicast-trigger
to enable the 802.1X multicast trigger function. The device acts as the
initiator and periodically multicasts Identify EAP-Request packets out of a port to detect 802.1X
clients and trigger authentication.
Use
undo dot1x multicast-trigger
to disable the function.
Syntax
dot1x multicast-trigger
undo dot1x multicast-trigger
Default
The multicast trigger function is enabled.
Views
Ethernet interface view
Default command level
2: System level
Usage guidelines
You can use the
dot1x timer tx-period
command to set the interval for sending multicast Identify
EAP-Request packets.
Examples
# Enable the multicast trigger function on interface GigabitEthernet 3/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 3/0/1
[Sysname-GigabitEthernet3/0/1] dot1x multicast-trigger
Related commands
display dot1x
dot1x port-control
Use
dot1x
port-control
to set the authorization state for the specified or all ports.
Use
undo dot1x
port-control
to restore the default.
Syntax
In system view:
dot1x
port-control
{
authorized-force
|
auto
|
unauthorized-force
}
[
interface
interface-list
]
undo dot1x
port-control
[
interface
interface-list
]
In Ethernet interface view:
