HPE FlexNetwork HSR6800 series Security Command Reference Download Page 147

Page: 147 / 538

134

Field Description

Authenticate success: 0, failed: 0

MAC authentication statistics, including the number of successful and
unsuccessful authentication attempts.

Max number of on-line users

Maximum number of concurrent online users allowed on the port.

If MAC authentication is not enabled on the port, the field displays

Current online user number

Number of online users on the port.

MAC Addr

MAC address of the online user.

Authenticate state

User status:

•

MAC_AUTHENTICATOR_CONNECT

—The user is logging in.

•

MAC_AUTHENTICATOR_SUCCESS

—The user has passed the

authentication.

•

MAC_AUTHENTICATOR_FAIL

—The user failed the

authentication.

•

MAC_AUTHENTICATOR_LOGOFF

—The user has logged off.

AuthIndex Authenticator

index.

mac-authentication

Use

mac-authentication

in system view to enable MAC authentication globally.

Use

mac-authentication interface

interface-list

in system view to enable MAC authentication on a

list of ports, or use

mac-authentication

in interface view to enable MAC authentication on a port.

Use

undo mac-authentication

in system view to disable MAC authentication globally.

Use

undo mac-authentication interface

interface-list

in system view to disable MAC

authentication on a list of ports, or use

undo mac-authentication

in interface view to disable MAC

authentication on a port.

Syntax

In system view:

mac-authentication

[

interface

interface-list

]

undo mac-authentication

[

interface

interface-list

]

In Ethernet interface view:

mac-authentication

undo mac-authentication

Default

MAC authentication is not enabled globally or on any port.

Views

System view, Ethernet interface view

Default command level

2: System level

Parameters

interface

interface-list

: Specifies an Ethernet port list, in the format of {

interface-type

interface-number

[

interface-type interface-number

] }&<1-10>, where &<1-10> indicates that you

can specify up to 10 port ranges. The start port and end port of a port range must be of the same type

Summary of Contents for FlexNetwork HSR6800 series



























































































































































































































































































































































































































































































































































Search results

Summary of Contents for FlexNetwork HSR6800 series

Reviews:

Related manuals for FlexNetwork HSR6800 series

Brands by name

Popular brands

HPE FlexNetwork HSR6800 series, Security Command Reference

Search results

Summary of Contents for FlexNetwork HSR6800 series

Reviews:

Related manuals for FlexNetwork HSR6800 series

Brands by name

Popular brands