HPE FlexNetwork HSR6800 series Security Command Reference Download Page 397

Page: 397 / 538

384

Views

Any view

Default command level

1: Monitor level

Parameters

slot

slot-number

: Specifies a card by its slot number. The

slot-number

argument represents the

number of the slot where the card resides. (In standalone mode)

chassis

chassis-number

slot

slot-number

: Specifies a card on a member device. The

chassis-number

argument specifies the ID of the IRF member device. The

slot-number

argument

specifies the number of the slot that holds the card. (In IRF mode)

source-ip

source-ip

: Displays the sessions with the specified source IP address.

destination-ip

destination-ip

: Displays sessions with the specified destination IP address.

verbose

: Displays detailed information about sessions. Without this keyword, the command displays

brief information about the specified sessions.

: Filters command output by specifying a regular expression. For more information about regular

expressions, see

Fundamentals Configuration Guide

begin

: Displays the first line that matches the specified regular expression and all lines that follow.

exclude

: Displays all lines that do not match the specified regular expression.

include

: Displays all lines that match the specified regular expression.

regular-expression

: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.

Usage guidelines

If no argument is specified, the command displays all sessions.

If no slot number is specified, the command displays the sessions on all cards.

If multiple keywords are specified, the command displays the sessions that match all these criteria.

This command is not supported by the FIP600 card.

Examples

# Display brief information about all sessions.

<Sysname> display session table

Initiator:

Source IP/Port : 192.168.1.18/2048

Dest IP/Port : 192.168.1.55/768

Pro : ICMP(ICMP(1))

VPN-Instance/VLAN ID/VLL ID:

Initiator:

Source IP/Port : 192.168.1.18/1212

Dest IP/Port : 192.168.1.55/23

Pro : TCP(TCP(6))

VPN-Instance/VLAN ID/VLL ID:

Total find: 2

# Display detailed information about all sessions.

<Sysname> display session table verbose

Initiator:

Source IP/Port : 192.168.1.19/137

Dest IP/Port : 192.168.1.255/137

Summary of Contents for FlexNetwork HSR6800 series



























































































































































































































































































































































































































































































































































Search results

Summary of Contents for FlexNetwork HSR6800 series

Reviews:

Related manuals for FlexNetwork HSR6800 series

Brands by name

Popular brands

HPE FlexNetwork HSR6800 series, Security Command Reference

Search results

Summary of Contents for FlexNetwork HSR6800 series

Reviews:

Related manuals for FlexNetwork HSR6800 series

Brands by name

Popular brands