15
[Sysname] domain test
[Sysname-domain-test] authentication super hwtacacs-scheme tac
Related commands
•
hwtacacs
scheme
•
radius
scheme
•
super
authentication-mode
(
Fundamentals Command Reference
)
authorization command
Use
authorization command
to configure the command line authorization method.
Use
undo authorization command
to restore the default.
Syntax
authorization command
{
hwtacacs-scheme
hwtacacs-scheme-name
[
local
|
none
] |
local
|
none
}
undo authorization command
Default
The default authorization method for the ISP domain is used for command line authorization.
Views
ISP domain view
Default command level
2: System level
Parameters
hwtacacs-scheme
hwtacacs-scheme-name
: Specifies an HWTACACS scheme by its name, a
case-insensitive string of 1 to 32 characters.
local
: Performs local authorization.
none
: Does not perform any authorization exchange. In this case, an authenticated user can access
only commands of Level 0.
Usage guidelines
The specified HWTACACS scheme must have been configured.
With command line authorization configured, a user who has logged in to the device can execute
only the commands with a level lower than or equal to that of the local user.
Examples
# Configure ISP domain
test
to use local command line authorization.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authorization command local
# Configure ISP domain
test
to use HWTACACS scheme
hwtac
for command line authorization and
use local authorization as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authorization command hwtacacs-scheme hwtac local
Related commands
•
local-user
