11
Default command level
2: System level
Parameters
local
: Performs local authentication.
none
: Does not perform any authentication.
radius-scheme
radius-scheme-name
: Specifies a RADIUS scheme by its name, a case-insensitive
string of 1 to 32 characters.
Usage guidelines
This command is supported only on SAP interface modules that are operating in Layer 2 mode.
The specified RADIUS scheme must have been configured.
Examples
# Configure ISP domain
test
to use local authentication for LAN users.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authentication lan-access local
# Configure ISP domain
test
to use RADIUS authentication scheme
rd
for LAN users and use local
authentication as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authentication lan-access radius-scheme rd local
Related commands
•
local-user
•
authentication
default
•
radius
scheme
authentication login
Use
authentication login
to configure the authentication method for login users through the console,
AUX, or Asyn port, Telnet, or FTP.
Use
undo authentication login
to restore the default.
Syntax
authentication login
{
hwtacacs-scheme
hwtacacs-scheme-name
[
local
] |
local
|
none
|
radius-scheme
radius-scheme-name
[
local
] }
undo authentication login
Default
The default authentication method for the ISP domain is used for login users.
Views
ISP domain view
Default command level
2: System level
