5-26
Compaq StorageWorks SSL2000 Series Library Maintenance and Service Guide
13.
Lift out the power supply assembly out and then lay it on the magazine side, being careful
not to bump the shuttle mechanism (see Figure 5-30).
cc0100
Figure 5-30. Removing the power supply
To replace the power supply:
1.
Place the power supply in the Library chassis (see Figure 5-30).
2.
Connect the wires from the power supply to the power switch (see Figure 5-29).
3.
Connect the following to the power supply (see Figure 5-28):
a.
Board (J2)
b.
Fan
c.
Drive power harness
4.
Using two screws, secure the power supply to the Library chassis (see Figure 5-27).
5.
Reconnect the power cable to the power supply (see Figure 5-31).
cc0101
Brown
Blue
Black
White
Figure 5-31. Connecting the power cable to the power supply
