C-18
Compaq StorageWorks SSL2000 Series Library Maintenance and Service Guide
7.
Attach the tie bars to the PTM extrusions using four screws (two each side).
See Figure C-17.
8.
Move location stop pin to lowest PTM extrusion (
Figure C-14).
cc0036
Figure C-17. Attaching tie bars to the PTM extension
Installing a New Belt
1.
Obtain a belt from extension kit and then cut it to the appropriate length (see Figure C-18).
NOTE:
A new full-length belt is marked 2, 3, 4, and so forth indicating where to cut per number of
Library units the PTM will service.
