5-18
Compaq StorageWorks SSL2000 Series Library Maintenance and Service Guide
7.
Lift the magazine guide out through the front door (see Figure 5-20).
cc0090
Figure 5-20. Removing the magazine guide
To replace the magazine guide:
1.
Place the new magazine guide into the Library (see Figure 5-20).
2.
Tighten the nine screws on the magazine guide (see Figure 5-19).
3.
Replace the bottom drive mounting plate (see Figure 5-18).
4.
After adding Loctite, install and fully tighten the four hex standoffs (see Figure 5-18).
5.
Replace the tape drive(s) as described earlier in this chapter.
6.
Replace the top drive mounting plate (see Figure 5-11).
7.
Replace the brace plate cover (Figure 5-10).
