2-16
Compaq StorageWorks SSL2000 Series Library Maintenance and Service Guide
When you scroll to your desired source, press the Enter
Enter
Enter
Enter button to select it. Two changes occur in
the display as shown below:
■
The * reappears at the beginning of line 2, indicating that you have made a selection.
■
The
u
moves to line 4, indicating that you can select a destination.
From:
*Slot 11
To:
u
*Drv 0
Press the Enter
Enter
Enter
Enter button to select Drive 1 as the destination. The following Confirmation Screen
appears:
From:
Slot 11 To: Drv 0
ENTER to Execute
ESCAPE to Cancel
Press the Enter
Enter
Enter
Enter button to execute the load or unload or the Escape
Escape
Escape
Escape button to cancel or return to
the From entry screen.
When you press the
Enter
Enter
Enter
Enter button, the following screen appears: If the source is a drive, the word
Unload appears in place of the word Load on line 4.
From:
Slot 11 To: Drv 0
Load In Progress
When the load or unload operation completes, the Default screen reappears.
Inserting and Removing Cartridges
The tape magazine must be removed from the Library in order to remove or insert cartridges
(see Figure 2-4). Make sure the slot you want to use is not already reserved for a cartridge that is
now in a drive. The safest way to do this is to unload all drives before removing the magazine.
You can unload all the drives either through your host computer software or by using the
LOAD/UNLOAD command on the Main menu.
Make sure the control panel is unlocked. When the control panel is locked, it is impossible to
enter the Menu Mode. The host computer must allow removal of the magazine. The host
software can enable or disable the door unlock function using the SCSI PREVENT/ALLOW
MEDIUM REMOVAL command. If the host is preventing removal, when you select Unlock
Door on the Main menu and press the Enter
Enter
Enter
Enter button, the message Magazine Locked appears.
