Removal and replacement procedures 111
TPM module (optional)
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
To install the component:
1.
Power down the server (on page
20
).
2.
Disconnect all peripheral cables from the server.
3.
Remove the access panel (on page
21
).
4.
Remove the riser cage (on page
70
).
5.
Locate the TPM connector on the system board (see page
11
for connector locations).
6.
Install the TPM module into the system.
To remove the component, reverse the installation procedure.
