Removal and replacement procedures 82
System battery
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
WARNING:
The computer contains an internal lithium manganese dioxide, a vanadium
pentoxide, or an alkaline battery pack. A risk of fire and burns exists if the battery pack is not
properly handled. To reduce the risk of personal injury:
Do not attempt to recharge the battery.
Do not expose the battery to temperatures higher than 70°C (158°F).
Do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water.
Replace only with the spare designated for this product..
IMPORTANT:
When the server is in standby mode, auxiliary power is still being provided to
the system.
To install the component:
1.
Power down the server (on page
20
).
2.
Disconnect all peripheral cables from the server.
3.
Remove the access panel (on page
21
).
4.
Remove the riser cage (on page
70
).
5.
Remove the system battery.
To replace the component, reverse the removal procedure.
