Removal and replacement procedures 83
System board
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION:
To avoid damage to the processor and system board, only authorized personnel
should attempt to replace or install the processor in this server.
CAUTION:
To avoid ESD damage, when removing electrostatic-sensitive components from
the failed system board, place the components on a static-dissipating work surface or inside
separate antistatic bags.
CAUTION:
To prevent damage to electrical components, take the appropriate anti-static
precautions before beginning any installation, removal, or replacement procedure. Improper
grounding can cause electrostatic discharge.
To install the component:
1.
Power down the server (on page
20
).
2.
Disconnect all peripheral cables from the server.
3.
Remove the access panel (on page
21
).
4.
Remove the power supply (on page
68
).
5.
Remove the fan duct (on page
69
).
6.
Remove the riser cage (on page
70
).
7.
Remove the DIMM (on page
76
).
8.
Remove the heatsink (on page
77
).
9.
Remove the OCP card if present (on page
102
).
10.
Disconnect and remove all cables from the system board (on page
124
).
