Removal and replacement procedures 70
Riser cage
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
To remove the component:
1.
Power down the server (on page
20
).
2.
Disconnect all peripheral cables from the server.
3.
Remove the access panel (on page
21
).
4.
Loosen the two thumbscrews securing the riser cage to the rear of the system.
5.
Remove the riser cages from the system.
a.
Loosen the two thumbscrews securing the riser cage inside the system.
