Removal and replacement procedures 112
VROC upgrade module (optional)
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
1.
Power down the server (on page
20
).
2.
Disconnect all peripheral cables from the server.
3.
Remove the access panel (on page
21
).
4.
Remove the riser cage (on page
70
).
5.
Locate the VROC upgrade module connector on the system board (see page
11
for connector
locations).
6.
Install the VROC upgrade module.
To remove the component, reverse the installation procedure.
