HPE Apollo DX2000 User Manual Download Page 29

Page: 29 / 120

Remove the SFF hot-plug drive

Procedure

1. Back up all server data on the drive.

2. If installed, remove the front bezel.

3. Determine the status of the drive from the drive LED definitions.

4. Press the Do Not Remove button.

Wait until the flashing stops and the Do Not Remove button is no longer illuminated.

5. Slide the drive out of the bay.

Remove the NVMe hot-plug drive

Procedure

1. Back up all server data on the drive.

2. If installed, remove the front bezel.

3. Determine the status of the drive from the drive LED definitions.

4. Press the Power button.

The Do Not Remove LED flashes white. Wait until the flashing stops and the Do Not Remove button is no longer
illuminated.

5. Press the Do Not Remove button.

6. Slide the drive out of the bay.

Operations

Summary of Contents for Apollo DX2000

























































































































Search results

Summary of Contents for Apollo DX2000

Reviews:

Related manuals for Apollo DX2000

Brands by name

Popular brands

HPE Apollo DX2000, User Manual

Search results

Summary of Contents for Apollo DX2000

Reviews:

Related manuals for Apollo DX2000

Brands by name

Popular brands