HPE Apollo DX2000 User Manual Download Page 22

Page: 22 / 120

Item

LED

Status

Definition

Flashing green

The drive is doing one of the following:

• Rebuilding

• Performing a RAID migration

• Performing a stripe size migration

• Performing a capacity expansion

• Performing a logical drive extension

• Erasing

Flashing amber/
green

The drive is a member of one or more logical drives and predicts the drive will fail.

Flashing amber

The drive is not configured and predicts the drive will fail.

Solid amber

The drive has failed.

Off

The drive is not configured by a RAID controller.

Do not
remove

Solid white

Do not remove the drive. The drive must be ejected from the PCIe bus prior to
removal.

Flashing white

The drive ejection request is pending.

Off

The drive has been ejected.

Power

Solid green

Do not remove the drive. The drive must be ejected from the PCIe bus prior to
removal.

Flashing green

The drive ejection request is pending.

Off

The drive has been ejected.

NVMe SSD button actions

Component identification

Summary of Contents for Apollo DX2000

























































































































Search results

Summary of Contents for Apollo DX2000

Reviews:

Related manuals for Apollo DX2000

Brands by name

Popular brands

HPE Apollo DX2000, User Manual

Search results

Summary of Contents for Apollo DX2000

Reviews:

Related manuals for Apollo DX2000

Brands by name

Popular brands