File <nodeID> "sr_mnt is full"
File -- "sr_mnt not mounted"
File -- "Admin Volume is not mounted"
File -- "An online upgrade is in progress"
file
example 1
File node:2 Behavior altering file "manualstartup" exists created on Oct 7 14:16
file
suggested action 1
After understanding why the files are present, the file must be removed to prevent unwanted behavior. As
root on a controller node, remove the file using the UNIX
rm
command.
Known condition: some undesirable touch files are not being detected (bug 45661).
file
example 2
Component -----------Summary Description----------- Qty
File Admin Volume is not mounted 1
file
suggested action 2
Each controller node has a file system link so that the admin volume can be mounted if that controller
node is the master controller node. This exception is reported if the link is missing or if the System
Manager (sysmgr) is not running at the time. For example,
sysmgr
might have been restarted manually,
due to error or during a change of master-nodes. If sysmgr was restarted, it tries to remount the admin
volume every few minutes.
Every controller node must have the following file system link so that the admin volume can be mounted,
if the controller node becomes the master controller node:
# onallnodes ls -l /dev/tpd_vvadmin
Node 0:
lrwxrwxrwx 1 root root 12 Oct 23 09:53 /dev/tpd_vvadmin -> tpddev/vvb/0
Node 1:
ls: /dev/tpd_vvadmin: No such file or directory
The corresponding alert when the admin volume is not properly mounted is as follows:
Message Code: 0xd0002
Severity : Minor
Type : PR transition
Message : The PR is currently getting data from the internal drive on
node 1, not the admin volume. Previously recorded alerts will not be visible
until the PR transitions to the admin volume.
If a link for the admin volume is not present, it can be recreated by rebooting the controller node.
file
example 3
Component -----------Summary Description----------- Qty
File Nodes with Dump or HBA core files 1
Component ----Identifier----- ----Detailed Description------
File node:1 Dump or HBA core files found
Troubleshooting
147
