HPC EI Series, Installation & Operation Instructions

Page: 22 / 45

22
Battery Requirements (Battery or DC Adaptor)
NOTE: This appliance is equipped with a low voltage electronic ignition system. The electronic ignition
requires 3 Volts DC. It can either be supplied by an 110v to 3v transformer adaptor or 2 D cell batteries
(in case electrical supply cannot be supplied).
Battery powered use 2 D cell batteries:
Please follow built in instruction requirement picture for location of 110v
15 amp GFCI outlet. (Outlet should be located on left side of oven base
minimum 12 -
18 inches from oven’s hearth). You must follow all
National Electrical Code regulations. In addition, be aware of local
codes and ordinances when installing your service.
Do not ground to a gas pipe.
Keep the power supply cord and fuel hose
away from hot surfaces.
Upon installation of electrical outlet and oven installation,
plug in outlet 3volt transformer and proceed with
installation.