HPA-Faip M 830 LL, Operator'S Manual

Page: 46 / 87

132 M 830 LL - M 830 M User Manual
- Now, and only now, oper-
ate the pedal (2,
Fig. 27b) until the bead is
completely demounted.
During demounting, over-lubrication and/or an
unusually shaped rim edge may cause the tyre
to slip on the rim, making demounting difficult.
First, try using the bead breaker disc in an
upward direction to raise the tyre. Otherwise,
to speed up the procedure simply place the
PTS accessory between the tyre and the edge
of the rim. This will allow the bead to be lifted
quickly off the rim so that it can be demounted.
NOTICE
- Here again, it might be helpful to use the bead
breaker disc on the underside of the tyre.
Engaging the bottom bead
(Demounting using the tool head)
- Place the tool on the edge of the rim (Fig. 28a).
- Push the bead breaker disc
against the bottom bead
(B) using control (1,
Fig. 28b).
-Using control (2, Fig.
2
27b
28a
1
28b