HPA-Faip M 830 LL, Operator'S Manual

Page: 23 / 87

M 830 LL - M 830 M User Manual 109
table.
2. Column with bead breaking unit and tool arm.
3. Air tank (FS version only).
4. Wheel lift (Optional).
5. Accessories box.
- Remove the packaging from the air tank and/
or any optional units, and place them in a
position where they cannot fall over and be
damaged.
- Reassemble the tool head lifting cylinder as
shown in figure 4a.
- Screw back on the bracket which supports the
bead breaker drive unit (fig. 4b).
- Fit the wheel lift (fig. 4c) using the three screws.
- Connect the tank as described on relative FS
manual supplied with the accessory. (FS ver-
sion only).
- Position the drawer units and rear tool tray using
the screws as shown in figure 4d.
- Connect the pneumatic hose to the pedals unit
respecting the correspondence of the colors
(fig. 4e).
- Connect the pneumatic red hose to the tool drive cylinder (fig. 4f).
4b
4c
4d
4e
4f 4g