HPA-Faip M 830 LL, Operator'S Manual

Page: 18 / 87

104 M 830 LL - M 830 M User Manual
1.2.d TECHNICAL DATA
For M 830 M see the manual 4-119892.
NOTICE
- Tyre types processed .. CONVENTIONAL - LOW PROFILE - RUN FLAT - BALOON - BSR
- Wheel dimension range:
• rim diameter ................................................................................................ from 12” to 30”
• maximum tyre diameter .............................................................................. 1200 mm (47”)
• maximum tyre width .................................................... 15” (from wheel support surface)
- Turntable:
• tools positioning in relation to rim ......................................................................... manual
• resting side ................................................................................................................flanged
• centring ..................................................................................................................... on cone
• clamping ............................................................................................... mechanical-manual
• drive system .......................................................................... 2-speed motor-inverter unit
- Bead Breaker Unit:
• bead breaking cylinder force .................................................................................... 7600 N
- Power supply:
• compressed air operating power: .......................................................................8÷10 bar
• min. air operating flow: ...................................................................................... 100 Nl/min
- Electric motor rating
Motor Rating kW
Rotation
speed rpm
Torque
Nm
Weight of electric/
electronic part kg
200-230V/1ph 50/60Hz 0.75 7-20 1200 10.2
115V/1ph 60Hz 0.75 7-20 1200 10.2
- Wheel lift:
• lifting capacity .............................................................................................................. 85 Kg
- Weight .............................................................................................. 320 kg (with wheel lifter)
- Noise level
• Weighted noise level A (LpA) in working position ..........................................< 70 dB (A
The stated noise levels are emission levels and do not necessarily represent safe op-
erating levels. Although there is a relationship between emission levels and exposure
levels, this cannot be used reliably to establish whether or not further precautions are
necessary. The factors which determine the level of exposure to which the operator is
subjected include the duration of the exposure, the characteristics of the workplace,
other sources of noise, etc. The permitted exposure levels may also vary from country
to country. However, this information will enable the machine’s user to make a more ac-
curate evaluation of the hazard and risk.