M 830 LL - M 830 M
User Manual
151
Gear unit noisy. The table top makes 1/3 of a revolution and then stops
Gear unit seizing.
➥
Renew gear unit.
Table top fails to clamp wheels
Handle engagement unit faulty.
➥
Check that it is synchronised properly.
➥
Replace the plate in the turntable.
➥
Check that there are no burrs.
➥
Replace the clamping handle.
Table top mounts or demounts tyres with difficulty
Insufficient belt tension.
➥
Adjust belt tension or renew it.
Vertical slide lifts too little or too far from rim
Clamping plate not adjusted.
➥
Adjust plate.
➥
Recalibrate
.
The vertical slide has difficulty rising
Defective clamping plate.
➥
Renew plate.
Clamping plate not adjusted.
➥
Adjust plate.
Vertical and horizontal limit stops do not operate
No air passing through clamping handle / valve.
➥
Check the hose circuit.
➥
Replace handle / valve.
Column does not tilt
Column tilting cylinder faulty.
➥
Replace column tilting cylinder.
No air supply to cylinder.
➥
Bends in hoses.
➥
Replace valve.
➥
Check tightness of slide pivot.
Locking arm cylinders leak air
Faulty piston or seals.
➥
Replace pistons and seals.
The column tilts violently or too slowly
Incorrect release valve setting.
➥
Adjust vent regulators on control valve.
Tyre pressure gauge needle fails to return to 0
Pressure gauge faulty or damaged.
➥
Renew pressure gauge.
Summary of Contents for M 830 LL
