152
M 830 LL - M 830 M
User Manual
When the machine is disconnected
from the air supply,
the devices
bearing the sign shown above may remain pressurised.
The wheel lift is not working
Control out of operation.
➥
Check pedal unit.
Rises slowly or has insufficient force.
➥
Check for bent hoses.
➥
Adjust vents on pedal unit.
➥
Replace the valve on the wheel lift control unit control device.
Cylinder leaking air.
➥
Replace cylinder gasket.
➥
Replace cylinder.
8. MAINTENANCE
For M 830 M see also the manual 4-119892 to integration
NOTICE
Any operation intended to modify the setting valve of the relief valve or pressure
limiter is forbitten. The manufacturer declines all liability for damage resulting from
tampering with these valve
Before adjusting or
servicing the machine
,
disconnect the electricity and
compressed air supplies and ensure that all moving parts are suitably
immobilised.
WARNING
Do not remove or alter any part of this machine (only technical assistance
personnel is permitted to do so).
WARNING
WARNING
WARNING
Summary of Contents for M 830 LL
