manualshive.com logo in svg

HP Synergy 480 Gen9, User Manual, Page: 54 / 66

Share
Download
HP Synergy 480 Gen9 User Manual Download Page 54

and configuration utilities to support HPE Synergy. The guide is task-based and covers the documentation
and resources for all supported software and configuration utilities available for:

• HPE Synergy setup and configuration
• OS deployment
• Firmware updates
• Troubleshooting
• Remote support

Best Practices for HPE Synergy Firmware and Driver Updates

The 

Best Practices for HPE Synergy Firmware and Driver Updates

 is in the Hewlett Packard Enterprise

Information Library (

www.hpe.com/info/synergy-docs

). It provides information on recommended best

practices to update firmware and drivers through HPE Synergy Composer, which is powered by HPE
OneView.

HPE OneView Support Matrix for HPE Synergy

The 

HPE OneView Support Matrix for HPE Synergy

 is in the Hewlett Packard Enterprise Information Library

(

www.hpe.com/info/synergy-docs

). It maintains the latest software and firmware requirements, supported

hardware, and configuration maximums for HPE OneView.

HPE Synergy Image Streamer Support Matrix

The 

HPE Synergy Image Streamer Support Matrix

 is in the Hewlett Packard Enterprise Information Library

(

www.hpe.com/info/synergy-docs

). It maintains the latest software and firmware requirements, supported

hardware, and configuration maximums for HPE Synergy Image Streamer.

HPE Synergy Glossary

The 

HPE Synergy Glossary

, in the Hewlett Packard Enterprise Information Library (

www.hpe.com/info/

synergy-docs

), defines common terminology associated with HPE Synergy.

HPE Synergy troubleshooting resources

HPE Synergy troubleshooting resources are available within HPE OneView and in the Hewlett Packard
Enterprise Information Library (

www.hpe.com/info/synergy-docs

).

Troubleshooting within HPE OneView

HPE OneView graphical user interface includes alert notifications and options for troubleshooting within HPE
OneView. The UI provides multiple views of HPE Synergy components, including colored icons to indicate
resource status and potential problem resolution in messages.

You can also use the Enclosure view and Map view to quickly see the status of all discovered HPE Synergy
hardware.

HPE Synergy Troubleshooting Guide

The 

HPE Synergy Troubleshooting Guide

 is in the Hewlett Packard Enterprise Information Library

(

www.hpe.com/info/synergy-docs

). It provides information for resolving common problems and courses of

action for fault isolation and identification, issue resolution, and maintenance for both HPE Synergy hardware
and software components.

54

 Best Practices for HPE Synergy Firmware and Driver Updates

Summary of Contents for Synergy 480 Gen9



































































Reviews:

No comments