manualshive.com logo in svg

HP Synergy 480 Gen9, User Manual, Page: 25 / 66

Share
Download
HP Synergy 480 Gen9 User Manual Download Page 25

5.

Review the compute module front panel LEDs to determine the compute module status. For more
information on the compute module LEDs, see "

Component identification

."

Completing the configuration

HPE OneView, hosted on the HPE Synergy Composer appliance installed within an HPE Synergy 12000
Frame, enables you to comprehensively manage a Synergy system throughout the hardware life cycle. To
configure the compute module for the first time, log into HPE OneView from the frame. For more information,
see the 

HPE Synergy 12000 Frame Setup and Installation Guide

 on the Hewlett Packard Enterprise website

(

www.hpe.com/info/synergy-docs

).

When adding a compute module to an existing configuration, HPE OneView automatically detects the new
hardware. Log into HPE OneView using your assigned user name and password to configure the hardware.
See the 

HPE OneView User Guide

 on the Hewlett Packard Enterprise website (

www.hpe.com/info/synergy-

docs

).

Completing the configuration

25

Summary of Contents for Synergy 480 Gen9



































































Reviews:

No comments