manualshive.com logo in svg

HP Synergy 480 Gen9, User Manual, Page: 35 / 66

Share
Download
HP Synergy 480 Gen9 User Manual Download Page 35

Item

Description

Definition

1

Capacity

8 GB

16 GB

32 GB

64 GB

128 GB

2

Rank

1R = Single-rank

2R = Dual-rank

4R = Quad-rank

8R = Octal-rank

3

Data width on DRAM

x4 = 4-bit

x8 = 8-bit

4

Memory generation

DDR4

5

Maximum memory speed

2400 MT/s

6

CAS latency

P=15

T=17

7

DIMM type

R = RDIMM (registered)

L = LRDIMM (load reduced)

For more information about product features, specifications, options, configurations, and compatibility, see the
product QuickSpecs on the Hewlett Packard Enterprise website (

http://www.hpe.com/info/qs

).

Memory configurations

To optimize compute module availability, the compute module supports the following AMP modes:

• Advanced ECC—Provides up to 4-bit error correction and enhanced performance over Lockstep mode.

This mode is the default option for this compute module.

• Online spare memory—Provides protection against failing or degraded DIMMs. Certain memory is

reserved as spare, and automatic failover to spare memory occurs when the system detects a DIMM that
is degrading. This allows DIMMs that have a higher probability of receiving an uncorrectable memory error
(which would result in system downtime) to be removed from operation.

Advanced Memory Protection options are configured in the BIOS/Platform Configuration (RBSU). If the
requested AMP mode is not supported by the installed DIMM configuration, the compute module boots in
Advanced ECC mode. For more information, see the 

HPE UEFI System Utilities User Guide for ProLiant

Gen9 Servers

 on the 

Hewlett Packard Enterprise website

.

Maximum capacity

DIMM type

DIMM rank

Capacity (GB)

One processor
(GB)

Two processors
(GB)

RDIMM

Single

8

96

192

RDIMM

Single

16

192

384

Table Continued

Memory configurations

35

Summary of Contents for Synergy 480 Gen9



































































Reviews:

No comments