• If TPM 1.2 is installed, then select
No Action, Enable, Disable,
or
Clear
.
• If TPM 2.0 is installed, then select
No Action
or
Clear
.
5.
Select
Visible
to set the TPM Visibility, if necessary.
6.
Press the
F10
key to save your selection.
7.
When prompted to save the change in System Utilities, press the
Y
key.
8.
Press the
ESC
key to exit System Utilities. Then, press the
Enter
key when prompted to reboot the
compute module.
The compute module then reboots a second time without user input. During this reboot, the TPM setting
becomes effective.
9.
Enable TPM functionality in the OS, such as Microsoft Windows BitLocker or measured boot.
For more information on adjusting TPM usage in BitLocker, see the
.
For more information on the UEFI System Utilities, see the
UEFI System Utilities User Guide for HPE
ProLiant Gen9 and Synergy Servers
in the
Hardware options installation
45