manualshive.com logo in svg

HP Synergy 480 Gen9, User Manual, Page: 10 / 66

Share
Download
HP Synergy 480 Gen9 User Manual Download Page 10

Item

Component

Description

4

Drive status LED

• Off—The drive is not configured by a RAID controller
• Solid green—The drive is a member of one or more logical

drives.

• Flashing green (4 Hz)—The drive is operating normally and has

activity.

• Flashing green (1 Hz)—The drive is rebuilding or performing a

RAID migration, stripe size migration, capacity expansion,
logical drive extension, or is erasing.

• Flashing amber/green (1 Hz)—The drive is a member of one or

more logical drives that predicts the drive will fail.

• Solid amber—The drive has failed.
• Flashing amber (1 Hz)—The drive is not configured and predicts

the drive will fail.

5

Adapter ejection release latch
and handle

Removes the SFF flash adapter when released

NVMe SSD components

The NVMe SSD is a PCIe bus device. A device attached to a PCIe bus cannot be removed without allowing
the device and bus to complete and cease the signal/traffic flow.

CAUTION:

Do not remove an NVMe SSD from the drive bay while the Do Not Remove button LED is flashing. The
Do Not Remove button LED flashes to indicate the device is still in use. Removal of the NVMe SSD
before the device has completed and ceased signal/traffic flow can cause loss of data.

1

2

3

4

Item

Description

1

Release lever

2

Activity ring

3

Do Not Remove button

4

Power button

10

 NVMe SSD components

Summary of Contents for Synergy 480 Gen9



































































Reviews:

No comments