manualshive.com logo in svg

HP Synergy 480 Gen9, User Manual, Page: 29 / 66

Share
Download
HP Synergy 480 Gen9 User Manual Download Page 29

CAUTION:

In systems that use external data storage, be sure that the compute module is the first unit to be
powered down and the last to be powered back up. Taking this precaution ensures that the system does
not erroneously mark the drives as failed when the compute module is powered up.

To install the component:

Procedure

1. Power down the compute module

.

2. Remove the compute module

.

3. Remove the access panel

.

4. Remove the front panel/drive cage assembly

.

5.

Install the controller.

6. Install the front panel/drive cage assembly

.

7. Install the access panel

.

8.

Install the compute module.

9. Power up the compute module

.

Installing the HPE Smart Storage Battery option

Procedure

1.

Power down the compute module

.

2.

Remove the compute module

.

3.

Place the compute module on a flat, level work surface.

4.

Remove the access panel

.

5.

Remove the right DIMM baffle

.

6.

Install the Smart Storage Battery.

Installing the HPE Smart Storage Battery option

29

Summary of Contents for Synergy 480 Gen9



































































Reviews:

No comments