HP Synergy 480 Gen9, User Manual, Page: 38 / 66

4. Remove the access panel .
5. Remove the DIMM baffle .
6. Install the DIMM.
1
2
2
7. Install all DIMM baffles.
8. Install the access panelInstall the access panel .
9. Install the compute module .
10. Power up the compute module .
To configure the memory mode, use UEFI System Utilities.
Installing the processor option
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system
components to cool before touching them.
CAUTION:
To prevent possible compute module malfunction and damage to the equipment, multiprocessor
configurations must contain processors with the same part number.
CAUTION:
The heatsink thermal interface media is not reusable and must be replaced if the heatsink is removed
from the processor after it has been installed.
CAUTION:
To prevent possible compute module overheating, always populate processor socket 2 with a processor
and a heatsink or a processor socket cover and a heatsink blank.
CAUTION:
To prevent damage to electrical components, properly ground the compute module before beginning
any installation procedure. Improper grounding can cause ESD.
IMPORTANT:
Processor socket 1 must be populated at all times or the compute module does not function.
To install the processor:
38 Installing the processor option