manualshive.com logo in svg

HP StorageWorks 7100 - Virtual Array, Appendix, Page: 2 / 27

Share
Download
HP StorageWorks 7100 - Virtual Array Appendix Download Page 2

FC-SCSI Interface SpecificationDescribes the IceCube SCSI interface. Targetted as part of OEM manual.Disk Array Con
 

Error! No text of specified style in document. 

Table 1. Controller Log Event Code Descriptions 

Event 

Number 

(dec/hex) 

Event 
Name 

Logged? 

Predictive 

Maintenance 

Implication 

Suspected 
Components 

Mf

g Fail? 

Description 

0/0x0 

No Sense 

N 

N.A. 

None 

N 

No sense data is available. 

1/0x01 

Undefined 

N 

N.A. 

None 

N 

Undefined event code. 

2/0x02 

Unsupported LUN Capacity 

N 

N.A. 

None 

N 

An attempt was made to create a LUN with an 
unsupported capacity.  The capacity was either zero 
or was greater than the maximum LUN capacity 
supported by the subsystem. 

3/0x03 

Parameter List Length Error 

N 

N.A. 

None 

Y 

The length of the parameter list was incorrect for the 
command and it’s parameters. 

4/0x04 

Invalid Field In Parameter List 

N 

N.A. 

None 

Y 

One or more of the fields in the parameter list 
contained an invalid value. 

5/0x05 

No Physical Device Present 

N 

N.A. 

None 

Y 

A command attempted to access a device (disk or 
enclosure controller) that is not currently present in 
the subsystem. 

6/0x06 

Invalid Opcode 

N 

N.A. 

None 

Y 

The opcode in the command that was received is not 
supported by the subsystem.  This error could be 
due to the LUN Security configuration. 

7/0x07 

Invalid Bit In CDB 

N 

N.A. 

None 

Y 

One or more fields in the CDB contained an illegal 
or unsupported value. 

8/0x08 

Logical Block Address Out Of 
Range 

N 

N.A. 

None 

Y 

The LBA specified in the command was out of 
range for the LUN that it was sent to. 

9/0x09 

Not Ready 

N 

N.A. 

None 

N 

The array is not ready to process the command that 
was received.  Furthermore, the array will not 
become ready until an initializing command is 
received and successfully processed. 

10/0x0a 

Undefined 

N 

N.A. 

None 

N 

Undefined event code. 

11/0x0b 

Power On Unit Attention 

N 

N.A. 

None 

N 

The array just completed a reset operation. 

12/0x0c 

Hardware Error Unit Attention 

N 

N.A. 

None 

Y 

The most recent reset operation detected a hardware 
error during a selftest operation. 

13/0xd 

Commands Cleared Unit 
Attention 

N 

N.A. 

None 

N 

Another originator sent commands to the array that 
resulted in commands being cleared for the current 
originator. 

14/0x0e 

Mode Parameters Changed 
Unit Attention 

N 

N.A. 

None 

N 

Another initiator sent commands to the array that 
resulted in shared mode parameters being changed 
for the current initiator. 

15/0x0f 

Unconfigured LUN 

N 

N.A. 

None 

N 

The LUN to which the command was sent is 
currently not configured for use. 

16/0x10 

Invalid Target LUN 

N 

N.A. 

None 

N 

The subsystem does not support the LUN that was 
specified in the most recent command. The LUN is 
the target of the requested action. 

17/0x11 

Invalid Source LUN 

N 

N.A. 

None 

N 

The subsystem does not support the LUN that was 
specified in the most recent command. The LUN is 
the source of the requested action. 

18/0x12 

Not Enough Space 

Y 

Ignore 

None 

Y 

A write command had to move data in order to find 
enough space to complete.  Errors were encountered 
during this process which precluded the controller 
from providing enough space for the write.  This 
would generally result from multiple failing or 
missing drives.  This failure can also result from 
faulty space management logic in the controller. 

19/0x13 

Command Illegal In Current 
State 

N 

N.A. 

None 

N 

The current subsystem state precludes processing of 
the requested command. 

20/0x14 

Becoming Ready 

N 

N.A. 

None 

N 

The subsystem is not ready to process the command 
that was received.  However, it is in the process of 
becoming ready and will be able to process that 
command soon. 

21/0x15 

Recovered With Low Level 
Retries 

Y Ignore Disk, 

controller, disk 
interface 

N 

On a previous attempt(s), the drive failed the I/O. 
The PDD retried the I/O and the drive returned good 
status.  PDD stands for Physical Device Driver.  
Specifically this error indicates that the RAID 
implementation was not involved in the retries. 

22/0x16 

Recovered By Disk Drive 

Y 

See information 

provided by 

drive vendor 

Disk Drive 

N 

The disk drive returned a status of 
CHECK_CONDITION, RECOVERED_ERROR. 

23/0x17 

Disk Drive Media Error 

Y 

See information 

Disk Drive 

N 

The disk drive returned a status of 

Summary of Contents for StorageWorks 7100 - Virtual Array




























Reviews:

No comments