Removal and Replacement Procedures
6. Push the tab on the slot release lever
(1)
.
7. Swing the lever back to unlock the expansion board
(2)
.
8. Lift the expansion board from the slot
(3)
.
Figure 2-37: Removing an expansion board from a non-hot-plug slot
Reverse steps 1 through 8 to replace an expansion board.
Hot-Plug Expansion Board Basket
To remove the hot-plug expansion board basket:
1. Prepare the server for a non-hot-plug procedure. Refer to “Preparing the Server for
Non-Hot-Plug Procedures” in this chapter.
2. Remove the front bezel door (tower model only), and lay the server on its side with the
access panel facing upward. Refer to “Removing the Front Bezel Door (Tower Model
Only)” in this chapter.
3. Remove the access panel. Refer to “Removing the Access Panel” in this chapter.
4. Remove cables to all PCI-X Hot Plug expansion boards (slots 1 through 4).
5. Remove all PCI-X Hot Plug expansion boards from the basket. Refer to “PCI and PCI-X
Hot Plug Expansion Boards” in this chapter.
HP ProLiant ML570 Generation 2 Server Maintenance and Service Guide
2-47
Summary of Contents for ProLiant ML570 Generation 2
Page 6: ......