Removal and Replacement Procedures
Installing a DIMM
To install a DIMM:
1. Remove the memory board. Refer to “Removing a Memory Board” in this chapter.
2. Observe all DIMM installation requirements for the desired memory mode. Refer to the
“DIMM Installation Requirements” section in this chapter for each mode.
IMPORTANT:
Follow all DIMM configuration requirements carefully. If the DIMMs are not
configured properly, you will receive an error message during POST and the DIMM LEDs will blink
amber.
3. Align the keyed portion of the bottom edge of the DIMM with the tab in the DIMM slot.
IMPORTANT:
The bottom edge of the DIMM is designed so that it fits into the DIMM slot only one
way.
4. Press the DIMM firmly into the slot
(1)
.
5. Push the latches into place
(2)
.
Figure 2-13: Installing and latching a DIMM
HP ProLiant ML570 Generation 2 Server Maintenance and Service Guide
2-21
Summary of Contents for ProLiant ML570 Generation 2
Page 6: ......
