Hardware options installation 59
6.
Install the PCI Express I/O expansion board.
7.
Install any expansion boards ("
Installing an expansion board
" on page
54
).
8.
Slide the processor memory drawer back into the server.
9.
Install the access panel (on page
27
).
10.
Slide the server back into the rack.
11.
Power up the server (on page
25
).
Installing the PCI-X/PCI Express I/O expansion board
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server unless
all expansion slots have either an expansion slot cover or an expansion board installed.
IMPORTANT:
When either optional I/O expansion board is installed in a two-processor
configuration, processor 2 and the I/O enabler must be installed.
1.
Power down the server (on page
25
).
2.
Extend the server from the rack (on page
25
).
3.
Remove the access panel (on page
26
).
Summary of Contents for ProLiant DL585 G7
