Hardware options installation 54
The cable and the cable arrangement might appear differently from shown.
7.
Install the SPI board.
8.
Install the access panel (on page
27
).
9.
Slide the server back into the rack.
10.
Power up the server (on page
25
).
Expansion board options
The server supports up to 11 expansion slots. The server ships with 5 PCI Express expansion slots.
To support the optional expansion slots, install one of the following options into the server:
•
PCI Express I/O Expansion Board—Adds six optional slots
•
PCI-X/PCI Express I/O Expansion Board—Adds five optional slots
Installing an expansion board
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server unless
all expansion slots have either an expansion slot cover or an expansion board installed.
1.
Power down the server (on page
25
).
2.
Extend the server from the rack (on page
25
).
3.
Remove the access panel (on page
26
).
Summary of Contents for ProLiant DL585 G7
