HP ProLiant DL380 G3 Setup And Installation Manual Download Page 58

Page: 58 / 95

System Setup and Configuration for

Microsoft NT Server 4.0, Enterprise Edition

IMPORTANT:

Updated installation and cluster setup information is periodically released in

HP white papers. For the most recent information, go to

www.hp.com/servers/proliant/highavailability

Preconfiguration Checks

Be sure that the following items are available for configuring the packaged cluster:

•
•

•

HP SmartStart CD 6.1 or later

Microsoft Windows NT Server 4.0, Enterprise Edition software and
documentation

Microsoft Windows NT Server 4.0, Enterprise Edition Service Pack 6a or later

Before configuring the packaged cluster:

Be sure you have sufficient software rights to install the operating system and
software applications on each server node.

Be sure all hardware is installed and properly cabled.

HP ProLiant DL380 Generation 3 Packaged Cluster Setup and Installation Guide

4-1

HP CONFIDENTIAL

Codename: Sopwith Part Number: 252621-002 Last Saved On: 11/8/02 2:08 PM

Summary of Contents for ProLiant DL380 G3
































































































Search results

Summary of Contents for ProLiant DL380 G3

Reviews:

Related manuals for ProLiant DL380 G3

Brands by name

Popular brands

HP ProLiant DL380 G3, Setup And Installation Manual

Search results

Summary of Contents for ProLiant DL380 G3

Reviews:

Related manuals for ProLiant DL380 G3

Brands by name

Popular brands