System Setup and Configuration for Microsoft Windows 2000 Advanced Server
3-6
HP ProLiant DL380 Generation 3 Packaged Cluster Setup and Installation Guide
HP CONFIDENTIAL
Codename: Sopwith Part Number: 252621-002 Last Saved On: 11/8/02 2:05 PM
4.
Rerun the ProLiant Support Pack for Windows 2000 to ensure that the latest HP
drivers were not overwritten by the service pack. Reboot if prompted.
5.
Power on the second server and repeat steps 2 through 4.
Validating the Cluster Configuration
To validate the cluster configuration, perform the following steps from either cluster
node:
1.
Select
Start, Programs, Administrative Tools, Cluster Administrator,
and
connect to the cluster.
2.
Right-click one group. Select
Move Group.
3.
Verify the group fails over to the other node and all resources come online.
4.
Right-click the same group. Select
Move Group.
5.
Verify that the group fails back to the original node and all resources come
online.
6.
Repeat steps 2 through 5 for each group.
Configuration is now complete.
IMPORTANT:
If the packaged cluster is being transferred, return to “Setup in the
Configuration Fixture” in Chapter 2 or refer to the packaged cluster hardware installation and
configuration poster to complete the process.
