HP ProLiant DL380 G3 Setup And Installation Manual Download Page 86

Page: 86 / 95

System Setup and Configuration for

SuSE Linux Enterprise Server 7.1

IMPORTANT:

Updated installation and cluster setup information is periodically released in

HP white papers. For the most recent information, go to

www.hp.com/servers/proliant/highavailability

Preconfiguration Checks

Be sure that the following items are available for configuring the packaged cluster:

•
•
•

HP SmartStart CD 6.1 or later

SuSE Linux Enterprise Server 7 (SLES 7)

LifeKeeper for Linux (three-CD set)

HP ProLiant DL380 Generation 3 Packaged Cluster Setup and Installation Guide

8-1

HP CONFIDENTIAL

Codename: Sopwith Part Number: 252621-002 Last Saved On: 11/8/02 3:08 PM

Summary of Contents for ProLiant DL380 G3
































































































Search results

Summary of Contents for ProLiant DL380 G3

Reviews:

Related manuals for ProLiant DL380 G3

Brands by name

Popular brands

HP ProLiant DL380 G3, Setup And Installation Manual

Search results

Summary of Contents for ProLiant DL380 G3

Reviews:

Related manuals for ProLiant DL380 G3

Brands by name

Popular brands