background image

 

 

About This Guide 

This guide provides step-by-step instructions for the setup and installation of the 
packaged cluster. It complements the server and storage system documentation. 

Audience Assumptions 

This guide is for the person who installs, administers, and troubleshoots servers. HP 
assumes you are qualified in the servicing of computer equipment and trained in 
recognizing hazards in products with hazardous energy levels. 

 

Important Safety Information 

Before installing this product, read the 

Important Safety Information

 document 

included with the server. 

Symbols on Equipment 

The following symbols may be placed on equipment to indicate the presence of 
potentially hazardous conditions: 

 

 

WARNING:  This symbol, in conjunction with any of the following symbols, 
indicates the presence of a potential hazard. The potential for injury exists if 
warnings are not observed. Consult your documentation for specific details.  

HP ProLiant DL380 Generation 3 Packaged Cluster Setup and Installation Guide 

vii 

  

 

HP CONFIDENTIAL

 Codename: Sopwith Part Number: 252621-002 Last Saved On: 11/8/02 9:58 AM 

 

Summary of Contents for ProLiant DL380 G3
































































































Reviews: