HP ProLiant DL380 G3 Setup And Installation Manual Download Page 78

Page: 78 / 95

System Setup and Configuration for

Red Hat Linux 7.3 Professional

IMPORTANT:

Updated installation and cluster setup information is periodically released in

HP white papers. For the most recent information, go to

www.hp.com/servers/proliant/highavailability

Preconfiguration Checks

Be sure that the following items are available for configuring the packaged cluster:

•
•
•

HP SmartStart CD 6.1 or later

Red Hat Linux 7.3 Professional

LifeKeeper for Linux (three-CD set)

HP ProLiant DL380 Generation 3 Packaged Cluster Setup and Installation Guide

7-1

HP CONFIDENTIAL

Codename: Sopwith Part Number: 252621-002 Last Saved On: 11/8/02 3:06 PM

Summary of Contents for ProLiant DL380 G3
































































































Search results

Summary of Contents for ProLiant DL380 G3

Reviews:

Related manuals for ProLiant DL380 G3

Brands by name

Popular brands

HP ProLiant DL380 G3, Setup And Installation Manual

Search results

Summary of Contents for ProLiant DL380 G3

Reviews:

Related manuals for ProLiant DL380 G3

Brands by name

Popular brands