Removal and replacement procedures 51
6.
Lift the release tabs, and then rotate them 180
°
counterclockwise.
7.
Lift the PCI riser cage to unseat the riser boards.
To replace the component, reverse the removal procedure.
Expansion board
To remove the component:
1.
Power down the server (on page
29
).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Do one of the following:
o
Extend the server from the rack (on page
30
).
o
Remove the server from the rack (on page
31
).
4.
Remove the access panel ("
Access panel
" on page
35
).
5.
Disconnect all cables connected to existing expansion boards.
6.
Remove the PCI riser cage ("
PCI riser cage
" on page
50
).
7.
Remove the expansion board.
