HP ProLiant DL180 Gen9, Service Manual

Page: 65 / 130

Removal and replacement procedures 65
b.
Remove the battery.
IMPORTANT: Replacing the system board battery resets the system ROM to its default
configuration. After replacing the battery, use BIOS/Platform Configuration (RBSU) in the UEFI
System Utilities ("
HP UEFI System Utilities " on page 90 ) to reconfigure the system.
To install the component:
1.
If the battery socket design uses a metal tab to secure the battery, insert the battery with the "+" side
facing up on the socket, and then press the battery down to secure it in place.
2.
If the battery socket design has a plastic outer lip to secure the battery, insert the battery with the "+"
side facing up underneath the outer lip of the socket, and then press the battery down to secure it in
place.
3.
If removed, install the secondary PCI riser cage.